Thanks for visiting!


We have been serving the Mustang Hobby for over 40 years by providing quality parts with great service and reasonable prices. Check out our web site.

We started this Blog to share pictures, show new parts, and just talk about 64 1/2-73 Mustangs. We love to feature Customer Cars also. If you would like to see your Classic Mustang right here on our Blog, send us an email by clicking here to find out how!!

Dec 2, 2011

Just the Details...1965 GT350 Mustang

1965 GT350 Mustang Shelby
www.VirginiaClassicMustang.com


It's not really a project car, but we are now "tweaking" a '65 GT350 Mustang in Jeremy Turner's Maple Hill Restoration shop.  This Shelby has been restored since 1985.  It was an extremely original car before restoration, and most all of its original parts were retained and re-installed during the restoration.  We first did some detailing before SAAC-36 at VIR this past summer, but we still had/have a list of things that we would like to do.


Take a look at a few pictures showing various parts of the car.
Under side of 65 GT350 Hood.  This is the original early style hood.
www.VirginiaClassicMustang.com

This is the original early style hood on a 1965 GT350 Shelby Mustang.
www.VirginiaClassicMustang.com

This is the original early style hood for the 1965 GT350 Mustang showing the hood scoop detail.
www.VirginiaClassicMustang.com

1965-66 Mustang Fastback Quarter Vent Assembly shown from the inside with the interior panels removed.
www.VirginiaClassicMustang.com
1965-66 Mustang Fastback Quarter area drain hose shown from the inside with the interior panels removed.
www.VirginiaClassicMustang.com
The 1965 GT350 Mustang had the spare tire mounted on the rear package tray and covered with a spare tire cover as shown.
www.VirginiaClassicMustang.com



Detail of the rear spare tire cover on the 1965 GT350 Mustang.
www.VirginiaClassicMustang.com


Fiberglass cover for the override rear traction bars found on 1965 and early 1966 GT350 Shelby.
www.VirginiaClassicMustang.com



On the '65 GT350 Mustangs, the early style rear spare bolt bracket was welded to the top of the panel over the rear axle to mount the bolt for the spare tire.
www.VirginiaClassicMustang.com

The front bolt holes made by Shelby American to mount the Monte Carlo bar look like they were kind of "punched" in there rather than cleanly drilled in this early '65 GT350.  The '66 Shelbys that I have observed have had a cleaner drilled hole.
www.VirginiaClassicMustang.com







1 comment:

James Bondo said...

Amazing pics. Great blog!