Thanks for visiting!


We have been serving the Mustang Hobby for over 30 years by providing quality parts with great service and reasonable prices. Check out our web site.

We started this Blog to share pictures, show new parts, and just talk about 64 1/2-73 Mustangs. We love to feature Customer Cars also. If you would like to see your Classic Mustang right here on our Blog, send us an email by clicking here to find out how!!

Wednesday, December 30, 2009

65-66 Mustang Cowl Side Panels

Here are some new parts that just arrived. These are the left and right panels that are located behind the front fenders below the cowl area on 1965-66 Mustangs.
I've posted some pictures below showing the actual location of the panel on a car.




They are available as part number SM1333R and SM1333L.


Monday, December 28, 2009

Mustang Pool Table

Okay, so you didn't get what you really wanted for Christmas. Maybe you should just go out and buy it yourself! How about this Mustang Pool Table!


This is a "real" pool table with a 4' x 8' foot slate top. The "body" is molded fiberglass. The front and rear of the body are actual size, but, of course, the overall length has been shortened. It even features working lights and is Ford licensed. How much? Only $14,995.00.
Check it out at MustangPoolTable.com.




Wednesday, December 23, 2009

'Twas the Night Before Christmas (Mustang Style)

I found this on the internet and tweaked it a bit. I don't know the author (sorry), but it is pretty cool!


'Twas the night before Christmas and in the garage,

There wasn't a trace of a Chevy or a Dodge.

The presents were wrapped and the lights were all lit,

So I figured I'd mess with the ‘Stang for a bit.

I popped out the hood pins and I lifted the hood,

When a deep voice behind me said "looks pretty good."

Well, as you can imagine, I turned mighty quick,

And there, by the workbench, stood good ol’ Saint Nick!

We stood there a bit, not too sure what to say,

Then he said "don't suppose that you'd trade for my sleigh?

I said "no way, Santa" and started to grin,

"But if you've got the time we could go for a spin!"

His round little mouth, all tied up like a bow,

Turned into a smile and he said "hey! Let's go!!"

So as not to disturb all the neighbors' retreat,

We pushed the Mustang quietly into the street,

Then, taking our places to drift down the hill,

I turned on the key and I let the clutch spill.

The sound that erupted took him by surprise,

But he liked it a lot, by the look in his eyes.

With Goodyear’s a' crying and side pipes aglow,

We headed on out where the hot rodders go.

And Santa's grin widened, approaching his ears,

With every up shift, as I went through the gears.

Then he yelled "can't recall when I've felt so alive!",

So I backed off the gas and said "you wanna drive?"



Ol’ Santa was stunned when I gave him the keys,

When he walked past the headlights he shook at the knees!

Then the HiPo exploded with side exhaust sound!

Santa let out the clutch and the tires shook the ground!


Power shift into second, again into third!

I sat there just watching, at loss for a word,

Then I heard him exclaim as we blasted from sight,

"Merry Christmas to all...........what a great night!!!"


Monday, December 21, 2009

More Colors for 69-70 and 71-73 Mustang Arm Rest Pads



Just arrived! We now have 1969-70 Mustang Arm Rest Pads available in Ivy Gold (Green) and Ginger. Of course, we still have Black and White ones also.

Click here to see them:




We also have a new color for the 1971-73 Mustang Arm Rest Pads. In addition to Black, Blue, and Ginger, they are now available in White.

Take a look at them here:




Friday, December 18, 2009

69 Ignition Switch Bezel Spacer

Here's a neat new part that just arrived for you 1969 Mustang owners. It is the chrome spacer that mounts under the ignition switch bezel on the '69 Mustang. It features show quality chrome plating. Part Number is IN8731.

Don't forget that we also have the screw on ignition switch bezel for the '69 also - part number IN873.

We still have the other bezels for the 69-70 Mustang Dash also:

IN811 69-70 Mustang Headlight Switch Bezel
IN813 69-70 Wiper/Washer Switch Bezel
IN815 70 Cigarette Lighter Bezel

Wednesday, December 16, 2009

1965 289 High Performance Mustang Convertible





We have not updated you about the progress on our early (August 1964) HiPo Mustang Convertible in quite some time. Well, at this point, we have no glamour, no shiney paint, and no sparkling chrome to show you.


This is just the hard, time consuming work that goes into getting the body prepared for that pretty paint. Ironically, the color that goes on the outside, and everyone sees, is really kind of the easy part.


Right now, the actual body work is done. Each panel is now being primed with the appropriate primer and then block sanded for the final primer.





In the next few months, we should have some "pretty" stuff to show you, particularly when the engine is painted, assembled and detailed.



Monday, December 14, 2009

71-73 Mustang Console Ash Tray



I've just got a quick post today about another new part. We have these 71-73 Ash Tray receptacles for the consoles. These are really nice and feature the correct zinc plating. The part number is IN6825.

If you don't have a 71-73 Mustang, you can find ash trays for your model Mustang by clicking here and here.

Oh, thanks to all of you for the overwhelming response to our Holiday 10% Mustang Parts Sale!

Please keep checking our Blog and Virginia Classic Mustang web site for more news about specials, new parts and other information concerning 64 1/2-73 Mustangs and Parts!!


Friday, December 11, 2009

Last Weekend for Mustang Parts Sale!!

Don't forget about our 10% off Holiday Sale. This is the last weekend to place your order for 10% off your Mustang Parts Order.

See last week's Blog post about this by clicking here.


Wednesday, December 9, 2009

Big Block Mustang Clutch Equalizer Bar Springs

We just got the Clutch Equalizer Bar Upper Retracting Spring in for the 1969-70 Mustangs equipped with the 390 and 428 Big Block Engines. This spring has been made to the exact specifications from the original Ford blue prints. It comes painted blue like the original.

Order Part number BK234.

Don't forget that we also have the lower clutch retracting spring for the 1967-70 Big Block Mustangs also. It is Part Number BK235.


Monday, December 7, 2009

Autolite Stamped Alternators


The manufacturer has stopped making the complete new Autolite Stamped Alternators for Mustangs that we have had listed in our print catalog. We recently got just a few more though. All of these alternators are high quality 61 Amp units, but are stamped with the correct Autolite stamping for your particular Mustang application. Obviously, any of these alternators will work with any application since the only difference is the stamping.

Please note that we only have a few of the following alternators:

1965 Mustang with 289 High Performance Engine EG544

1966-67 Mustang with 289 High Performance Engine EG547

1968 Mustang - 200, 289 - No Power Steering or Air Conditioning EG551


Friday, December 4, 2009

Holiday Sale--10% off


The season is here and we would like to extend our holiday spirit to you by offering 10% off your next online order with us. Log onto the website (new customers will need to register), fill your shopping cart, and proceed to checkout. Enter N75RTW right above the payment information during the checkout process.



Offer expires 12/14/09. Excludes gift certificates.

We have started a VCM Newsletter. If you would like to sign-up to receive even more discounts and exciting news, register here.





Wednesday, December 2, 2009