Another Cool New Mustang Part! FoMoCo Stamped Stainless Steel Hose Clamp Set

We have the correct tower style Wittek hose clamps, but if you want easy to use and re-usable clamps, you may want to consider our new worm gear hose clamps. These aren't just any hose clamps either! They are the perfect "finishing touch" to your Mustang with the cool FoMoCo logo right on the top. Note: Only the small fuel line clamps do not have the FoMoCo logo.

They are not generic hose clamps. These clamps are sized properly for a clean look with no excess "tail" after tightening. Stainless steel construction means they won't rust.

Sets for small block Fords (260, 289, 302, 351W) are currently available. A set includes the following clamps:

• 2 lower radiator 2 1/8" clamps
• 2 upper radiator 2" clamps
• 6 heater hose / thermostat bypass hose 5/8" clamps
• 6 fuel line / gas sending unit 5/16"-3/8" clamps

Note: These will not fit a 6 cylinder. Kit will work on big blocks with the exception of one lower radiator hose clamp at the water pump (it is too small).

Our part number is PE-102S. Check them out by clicking here.

68 Mustang Radiator Hoses

1968 Mustang Radiator Hoses with correct wire style clamps stapled on like the originals.  Correct Autolite stamping with part numbers.
www.VirginiaClassicMustang.com

We have a large variety of correctly stamped FoMoCo and Autolite Radiator hoses.  Our newest version is for the Upper and Lower radiator hose set for the 68 Mustang equipped with the 289 and 302 engines.  These hoses feature the correct stapled wire style hose clamps already installed.  Our part number is EG-4781.  These hose are made by an original OEM manufacturer to the latest SAE standards.  They feature the correct bends and the correct logos and part numbers.

NEW! 1967 Mustang and Shelby Radiator Hose Sets with Stapled Clamps

We have a complete line of FoMoCo and Autolite stamped Radiator Hoses for most model years of Mustangs.  You can see them all by clicking here.

Several months ago, we got in a new set of hoses that a lot of 66 GT350 and other Mustang owners had been asking for.  Our part number is EG-4771.  These hoses have been extremely popular.

We now have the 1967 Mustang version of this same hose.  These hoses will be great for that "final detail" on any 289 equipped 67 Mustang, including all of the 1967 model GT350 Shelbys.  Our part number is EG-1871.

The following is the description on our web site:

A special experiment began for the 1966 and 1967 model year at Ford Motor Company. A test was underway to determine if a new assembly line method would help speed up production. This test, at the Dearborn and San Jose assembly plants consisted of attaching clamps to the radiator hoses to save the assemblers time. Note the "Pat Pend" stamp on the hoses. Virtually all Shelby GT350s should have this style of hose, along with most other 289 Mustangs.

These radiator hoses are made by an original OEM manufacturer to the latest SAE standards. They feature correct bends. The hoses have the original double-wire clamps stapled to the hose with the correct orientation as was done on original assembly line hoses. These are the only hoses with this feature. The logo and part number stamped on the hose are the correct ones. The part numbers and logo are printed with the correct font size and style to match the originals exactly. Do not clean hoses with Armor-All or other products that contain solvent. We recommend cleaning by using a very dilute soapy water solution on a damp cloth with very light pressure.

This is a Ford Licensed product.

NEW! 1966 Mustang Radiator Hoses with Stapled Clamps

We have a complete line of FoMoCo and Autolite stamped Radiator Hoses for most model years of Mustangs.  You can see them all by clicking here.

We just got in a new set of hoses that a lot of 66 GT350 owners have been asking for.  Our part number is EG-4771.

A special experiment began for the 1966 model year at Ford Motor Company. A test was underway to determine if a new assembly line method would help speed up production. This test, at the Dearborn and San Jose assembly plants consisted of attaching clamps to the radiator hoses to save the assemblers time. Note the "Pat Pend" stamp on the hoses. Virtually all mid to late production Shelby GT350s should have this style of hose, along with most other 289 Mustangs.

These radiator hoses are made by an original OEM manufacturer to the latest SAE standards. They feature correct bends. The hoses have the original double-wire clamps stapled to the hose with the correct orientation as was done on original assembly line hoses. These are the only hoses with this feature. The logo and part number stamped on the hose are the correct ones. The part numbers and logo are printed with the correct font size and style to match the originals exactly. Do not clean hoses with Armor-All or other products that contain solvent. We recommend cleaning by using a very dilute soapy water solution on a damp cloth with very light pressure.

This is a Ford Licensed product.

65-69 Mustang Silicone Radiator Hose Set

Here is a neat part set that we just got in. We just got a few, but more will be arriving. This hose set includes the upper and lower radiator hoses along with the bypass hose. It will fit most 65-69 Mustangs with the bolt in radiator and small block (260, 289, 302) engine.

These are nylon reinforced black silicone hoses. Silicone lasts longer and has a higher burst pressure than regular rubber hoses. Lower hose also has a stainless steel spring.

These silicone hoses have been very popular on late model Mustangs, and now you can get them for your early model.