1965 and 1966 289 High Performance (HiPo) Fan Spacer Bolts

 

1965 and 1966 289 HiPo Fan Spacer Bolts

We are super happy to announce that we now have the correct 65-66 289 HiPo engine fan spacer bolts. These bolts have the proper "flag" headmarkings and are EXACTLY like the originals found on all 289 high performance engines including, of course, the GT350 Shelby.

They are also made in the USA!

Click here to order.

Don't forget! We also have the correct HiPo Fan Spacer.

New Mustang Part! Short Fan Spacers

1.5 Inch Mustang and Ford Fan Spacer
www.VirginiaClassicMustang.com

We now have 1 1/2 inch fan spacers for your Mustang and other Ford.  These shorter spacers are great when more room is needed for those thick radiators.

We have two versions available - natural aluminum cast finish and highly polished aluminum:

EG-6447  Natural Finish 1.5 inch Mustang Fan Spacer   Click here

EG-6448  Polished Finish 1.5 inch Mustang Fan Spacer   Click here

Don't forget that we still have our 2 1/4 inch spacers and our exact reproduction 289 HiPo Fan Spacer.  Click here to see them all.

1.5 Inch Mustang and Ford Fan Spacer
www.VirginiaClassicMustang.com

HiPo Fan Spacers are in stock!!

A few months ago, we posted about our new 65-66 High Performance Mustang Fan Spacers. We got a few spacers in from the first small run. The response was overwhelmingly positive. This part is really a quality piece, and we were so pleased that we could get it reproduced with the proper little details.

The larger run just came in, so we will be filling all of those orders for our customers that have been patiently waiting for this part.




This unique fan spacer was originally installed on all 1965-66 K Code / 289 High Performance equipped Mustangs, which, of course, also included the 65-66 GT350 Shelbys. It is the original length which properly places the fan at the opening of the fan shroud allowing air to be drawn in. So often, the wrong spacer is used and the fan is place too far inside the shroud. This does not allow the fan to do its job.

We decided to pursue this project after seeing the lack of availability of the original spacers. Along with the lack of availability, the prices on originals were as high as $300.00 and many of the originals are just badly pitted.

This spacer, of course, will work on any small block Ford with a non-clutch style fan. It is also, of course, a great compliment to our High Performance Fan.

1965-66 Mustang HiPo / GT350 Fan Spacers

We now have a very limited supply of new reproduction 65-66 Mustang HiPo / GT350 Shelby Fan Spacers. We will be getting our larger stock in around the first part of February. We never advertise something like this before we have a large stock, but this part is so exciting that we wanted to offer it on this "pre-order" basis. As of this post, we do have a few remaining from the first small run, so you might be able to get one now. If not, you may place an order now to receive it as soon as more arrive in February.

I think that they turned out nice. They are the correct size (2.36" total / 2 1/16" not counting alignment pilot dowel) with the FoMoCo Logo (Ford Licensed.) They also feature the "blocked out" casting number and the "winged" logo with the casting cavity number "3." I've seen some with "4" also. I'm guessing "1" and "2" may exist also.

The '65-66 289 High Performance Mustangs are my favorite cars, and can tell you that this is one of the most difficult, unique "K Code" pieces that there is to find. When you do find them, the original aluminum casting is usually very pitted. The originals can also be very expensive. The last one that I saw on EBay brought $300.00!!

Price is $49.95, and you can order by clicking here - Part number is EG6445.

Mustang Radiator Fan Spacers

Finally!!! We now have a very nice, original looking fan spacer for your Mustang. When you install a larger (thicker core) radiator in your car, it is often necessary to use a shorter fan spacer. Up until now, you had to use one of those "universal" style spacers. They do the job, but it is a whole lot nicer to use an original looking fan spacer.

We just got these in. They look just like originals and are 2 1/4 inches in length. They are available in a natural aluminum finish like the original and a cool custom polished aluminum finish.

Check them out or order by click on the part number below.

EG6441 Natural finish fan spacer

EG6442 Polished Aluminum fan spacer