Thanks for visiting!
We started this Blog to share pictures, show new parts, and just talk about 64 1/2-73 Mustangs. We love to feature Customer Cars also. If you would like to see your Classic Mustang right here on our Blog, send us an email by clicking here to find out how!!
Apr 8, 2013
50th Mustang Celebration
Here is the latest update about the 50th Mustang Birthday Celebration planned for 2014:
Apr 5, 2013
Just the Details...1966 Shelby Restoration 6S033
| The 1966 Shelby on the rotisserie and in epoxy primer. www.VirginiaClassicMustang.com |
Today, we have some more pictures of our 1966 GT350 Mustang Shelby Restoration. If you missed our last post about the car now being in epoxy primer, you can check it out here.
Here are some detail shots of various areas. We also have photos posted on our Facebook Page.
| The 1966 Shelby on the rotisserie and in epoxy primer. Here is an earlier shot showing the front frame rail support being straightened. We definitely wanted to save the original. www.VirginiaClassicMustang.com |
| Here is the one of the original rails after being straightened. These rails are almost always dented from someone using this point to jack up the Mustang. www.VirginiaClassicMustang.com |
| This area in the transmission tunnel was taped off. It is a patch of the original paint. Here we are showing the paint that was chosen to match the original color. It is a strange pinkish brown color. I've seen this shade on late '65's and early '66's. The underside color is usually a bit darker on later '66 Shelbys. www.VirginiaClassicMustang.com |
| This is a close up shot of the date stamp on the seat riser pan. It's June 17th. www.VirginiaClassicMustang.com |
| Export brace reinforcement for the Shelby that was welded on the cowl area. www.VirginiaClassicMustang.com |
| This photo shows a hole that was blown through the cowl when the export brace reinforcement was welded on at Ford. This area will be eventually covered in sealer like it was originally. www.VirginiaClassicMustang.com |
| Here is a close up of the rear frame rail with the exhaust hanger holes found on the factory dual exhaust equipped Mustangs. www.VirginiaClassicMustang.com |
| Here you can see the original holes for the tach wiring and bracket mounting that were cut in the dash at Shelby American. www.VirginiaClassicMustang.com |
| We were lucky enough to have a very nice area of original paint. We saved this and will use it to match the original Wimbledon White paint. www.VirginiaClassicMustang.com |
Apr 3, 2013
Just the Details...1966 Shelby Restoration 6S033
| Our 1966 GT350 Mustang Shelby Restoration project is now in epoxy primer. www.VirginiaClassicMustang.com |
As you may have read in our last post, the '66 GT350 Mustang project is now in epoxy primer. We used the popular PPG DP epoxy primer. The gray color was used on the body, and black was used in the engine compartment area and dash. The color for the underside was mixed to be fairly close to the original underside color with the darker red being used under the front frame rails and the interior panels.
The choice of colors is really not important, because the bodywork now needs to be completed. It looks nice though! Even the underside of the car will eventually receive a topcoat of paint matched to the original colors along with the associated overspray.
| Our 1966 GT350 Mustang Shelby Restoration project is now in epoxy primer. We chose to mix the colors to achieve a pinkish color for the underside. This will not be the final finish. www.VirginiaClassicMustang.com |
| Our 1966 GT350 Mustang Shelby Restoration project is now in epoxy primer. www.VirginiaClassicMustang.com |
| Our 1966 GT350 Mustang Shelby Restoration project is now in epoxy primer. www.VirginiaClassicMustang.com |
| Our 1966 GT350 Mustang Shelby Restoration project is now in epoxy primer. This image shows the rear section of the floor pans and the rear parking brake cable brackets. www.VirginiaClassicMustang.com |
| Our 1966 GT350 Mustang Shelby Restoration project is now in epoxy primer. This shot shows the backside of the dash. www.VirginiaClassicMustang.com |
| Our 1966 GT350 Mustang Shelby Restoration project is now in epoxy primer. The original inner floor frame support was straightened and retained. More on this in our next post. www.VirginiaClassicMustang.com |
| Our 1966 GT350 Mustang Shelby Restoration project is now in epoxy primer. This shot shows the underside of the panel behind the rear window from the trunk area. www.VirginiaClassicMustang.com |
Apr 1, 2013
Just the Details...1966 Shelby Restoration 6S033
| The '66 Shelby Mustang is now in epoxy primer. The front engine compartment is shown here in black epoxy primer. www.VirginiaClassicMustang.com |
It's been a while since we had a post about our 1966 Carryover GT350 Mustang Shelby. If you have been reading, it's 6S033 (the 33rd '66). It is one of the '66's with the rear package tray (no rear seat). You can read more about the "Carryover" Shelbys at www.CarryoverGT350.com.
We are excited to share some pictures from the project again. We will have more to share this week, but we will start with these "geeky" detail pictures.
Number 33 has now been glass beaded and is in epoxy primer (more on that later). Before the epoxy primer was applied to the entire car though, Jeremy at Maple Hill Restoration (www.MapleHillResto.com) applied the primer to the cracks, crevices, and insides of the clean frame rails. A small spray gun was used in this process, and the whole project was a bit of a mess. The result though is fantastic. Check out the photos and stay tuned for more!
| The '66 Shelby Mustang is now in epoxy primer. This image shows a close up of the bottom of the front frame rail. Primer was sprayed inside the clean rail. www.VirginiaClassicMustang.com |
| The '66 Shelby Mustang is now in epoxy primer. This image shows a close up of the bottom of the front shock tower area. Primer was sprayed inside this area. www.VirginiaClassicMustang.com |
| The '66 Shelby Mustang is now in epoxy primer. This image shows a close up of the rocker panel Primer was sprayed inside the clean rocker. www.VirginiaClassicMustang.com |
| The '66 Shelby Mustang is now in epoxy primer. Primer was carefully sprayed in all of the seams. www.VirginiaClassicMustang.com |
| The '66 Shelby Mustang is now in epoxy primer. Primer was carefully sprayed in all of the seams. www.VirginiaClassicMustang.com |
| The '66 Shelby Mustang is now in epoxy primer. Primer was carefully sprayed in all of the seams. This is the area where the front of the rear leaf spring mounts. www.VirginiaClassicMustang.com |
| The '66 Shelby Mustang is now in epoxy primer. Primer was carefully sprayed in all of the seams. This image shows the primer running out of the seat riser and floor pan areas. www.VirginiaClassicMustang.com |
| The '66 Shelby Mustang is now in epoxy primer. This is the inside of the cowl area. www.VirginiaClassicMustang.com |
| The '66 Shelby Mustang is now in epoxy primer. This image shows the inside of the lower radiator support crossmember which was sprayed with primer. www.VirginiaClassicMustang.com |
Mar 29, 2013
65-66 GT350 Mustang Oil Cap to Air Cleaner Base Hose
![]() |
| Hose Kit with Clamps for 65-66 GT350 Mustang Shelby. This hose fits from the oil cap to the air cleaner base. www.VirginiaClassicMustang.com |
We measured several originals and came up with a common length of right under nine inches, so that is what is in the kit. The proper "squeeze type" clamps are also included.
This hose would have also been originally used on any 289 HiPo Mustang that was originally delivered to a California DSO. This was basically the smog or emissions equipment back in 1965 for the High Performance Mustang.
Our part number is EG-3952.
Mar 27, 2013
Ford Announces Mustang 50th Anniversary Logo
Yesterday, Ford announced the logo for the Mustang's 50 Anniversary. The logo was designed by Ford designer Michael Thomson.
The Mustang official birthday is, of course, April 17th.
Read more here on the Mustang Monthly Blog by Donald Farr.
The Mustang official birthday is, of course, April 17th.
Read more here on the Mustang Monthly Blog by Donald Farr.
Mar 25, 2013
New Part! 1964 1/2 - Early 65 Mustang Spare Wheel Holddown
![]() |
| 1964 1/2 - early 65 Mustang Spare Wheel / Tire Holddown Bracket. www.VirginiaClassicMustang.com |
This bracket is finished in weld through primer and is ready to weld to the trunk floor.
Our part number is SM-9401. Please click on the part number or the images for more information or to order.
![]() |
| 1964 1/2 - early 65 Mustang Spare Wheel / Tire Holddown Bracket. www.VirginiaClassicMustang.com |
Subscribe to:
Posts (Atom)




