Thanks for visiting!


We have been serving the Mustang Hobby for over 40 years by providing quality parts with great service and reasonable prices. Check out our web site.

We started this Blog to share pictures, show new parts, and just talk about 64 1/2-73 Mustangs. We love to feature Customer Cars also. If you would like to see your Classic Mustang right here on our Blog, send us an email by clicking here to find out how!!

Mar 17, 2014

Mustang and Ford Radio Suppressors Mounted at the Voltage Regulator

Mustang and Ford Radio Noise Suppressor / Capacitor mounted at Voltage Regulator.
www.VirginiaClassicMustang.com


We have reproduced the radio suppressors that mount at the voltage regulator on all Mustangs and Fords equipped with radios.  As the pictures show, we have made the style found on the '65's with the C3SA-18832-A number stamping, '66's with the C6OA-18832-A number and FoMoCo Script, and '67-71 with the C6OA-18832-A number and Autolite logo.  I'm aware that there were several versions of the Autolite stamped part.  We chose the one shown. These are correct, working parts with the proper plating, markings, wire and connector as shown.  I hope to have them ready to offer for sale within a few weeks.  I'll post them right here as soon as they are available for sale.  I'm very pleased with how they turned out.  Take a look!

Mustang and Ford Radio Noise Suppressor / Capacitor mounted at Voltage Regulator.
www.VirginiaClassicMustang.com

Mustang and Ford Radio Noise Suppressor / Capacitor mounted at Voltage Regulator.  This is the 1965 style.
www.VirginiaClassicMustang.com

Mustang and Ford Radio Noise Suppressor / Capacitor mounted at Voltage Regulator.  This is the 1966 style.
www.VirginiaClassicMustang.com


Mustang and Ford Radio Noise Suppressor / Capacitor mounted at Voltage Regulator.  This is the 1967-71 style.
www.VirginiaClassicMustang.com



Mar 14, 2014

65-66 GT350 Shelby Mustang One Inch Sway Bar Bushing Brackets - Pair



1965 and 1966 Shelby Sway Bar Bushing Brackets - Pair Original Ford Part Number is C0DD-5486-A
www.VirginiaClassicMustang.com


1965-66 GT350 Shelby Mustang One Inch Sway Bar Bushing Mounting Brackets.
Made exactly like the originals from assembly line parts.
Made in the original .103 inch thickness like the assembly line brackets rather than the NOS ones that are only .091 inch thick.
Virtually impossible to tell from the original.
Original Ford part number is C0DD-5486-A.
Come in the original bare metal finish with a hard (undetectable) protective coating to protect the finish.  
Sold as a pair.
Virginia Classic Mustang Exclusive.


In stock and ready to ship!

Our Part Number is SU-3211


Perfect compliment to our SU-321 Exact Reproduction Bushings.

Mar 12, 2014

Another Great Customer Car! 1966 Mustang Convertible

 Sweet as Candy
Fix Motorsports builds an awesome ride with Shelby Fix
A few years ago Fix Motorsports owner Paul Fix started on this project with daughter Shelby Fix. Disassembling every nut and bolt, Shelby started the process with intentions to build a show car to be driven. Over breaks in her schedule at Marist College, Shelby would help assemble the car after it came back from the paint shop. The goal was to finish in time for her graduation in May 2014. It was finished a few months early and just in time for the annual indoor car show in Buffalo NY. The Calvalcade of Cars, Classic and Custom Car Show. Shelby’s car won Outstanding Modified Classic. Next it’ll be shown at the Mustang 50thBirthday Celebration in Charlotte NC.
The car started life in 1966 at the San Jose assembly plant and was delivered to Sunrise Ford in Fontana CA. It lived there with it's original owner until 2009. Needless to say it was a virgin body without any rust or needing any body repair.
Paul Fix has restored over 55 Mustangs, always striving for authenticity, but this time Shelby was making the decisions on how it would be built and she wanted to do something different. So it was modified with a bit of pro touring suspension for ride and handling. Then mixing in a few ‘65 parts for better looks.
Here are some highlights of the build:
Body:
The paint color is 2012 Ford Mustang, Candy Apple Red Metallic Clear Coat.
Drivetrain:
-Engine is a built 289 cid, 350 hp. with ported and polished heads and a Hipo Hydraulic, Comp Cams Nostalgia cam.
-Cobra engine dress up Kit with Cobra dual plane intake, Cobra open letter valve covers and Cobra T-Pan.
-March Performance Billet Aluminum Pulley set.
-Autolite Dual Point distributor.
-Holley 600 cfm 4 barrel carburetor.
-Tri Y headers into a custom H pipe and Flowmaster Dual exhaust.
-Tremec World Class T-5, 5 speed conversion (M-7003-Z).
-8” rear end with 3.80 ring and pinion and an Auburn Gear Limited Slip differential.
Wheels and tires:
American Racing Torque Thrust II, 2 pc. wheels, 17”x8” with a 4 ¾ ” backspacing and Michelin Pilot Super Sport Tires, 235/45ZR17. So we didn’t need to roll the fender lips. Custom machined center caps.
Brakes:
-Baer Brakes SS4+ 13” front and rear Brake kits with cross drilled and slotted zinc washed rotors and etched Shelby logos.
-Classic Tube Stainless Steel brake and fuel lines incorporating a dual chamber master cylinder and adjustable proportioning valve.
-StopFlex Stainless Steel braided DOT brake hoses.
Suspension and steering:
-Front coil springs are 620 lb. Powder coated black with the Shelby 1” lowering modification to the upper control arm. Rear leaf springs are mid eye 4 ½ leaf rated at 175#’s..
Borgeson Power steering conversion kit using the Shelby quick steering idler and pitman arm.
-1” Shelby front sway bar.
-Koni shocks.
About: Fix Motorsports LLC was founded in 1989 as a restoration and road race preparation company in Lancaster NY. They have had success on and off the track, winning concourse shows at ISCA, AACA, SAAC and other events as well as Winning in SVRA and SCCA Trans Am Road Racing Series.  Visit www.fixmotorsports.com









Mar 10, 2014

Donald Farr - Former Editor of Mustang Monthly


Donald Farr is certainly a great friend.  The now former editor of Mustang Monthly Magazine is the author of the great Mustang Fifty Years book.  We will miss him at Mustang Monthly and look forward to his next endeavor.

Here's a link to a nice article from Donald's local Lakeland, Fl newspaper:

http://www.theledger.com/article/20140308/NEWS/140309245?p=1&tc=pg

Mar 7, 2014

Just the Details...1966 Shelby Mustang GT350

The clean up continues on the 1966 Shelby Mustang.
www.VirginiaClassicMustang.com

As we mentioned in our last Blog post, we are taking a different approach with this 1966 Shelby GT350. Rather than actually restoring it, we have chosen to clean it up and maintain all of the original parts and finishes that are possible.  This task is being performed by Jeremy at Maple Hill Restoration.  We also want to credit him with taking most of these great pictures here.

In performing this "clean up", it was also important that the car run and function like it did when it was new. To do this, we decided to remove the suspension and brake system too.  The control arms had been maintained over the years with new replacement ball joints.  We will be replacing these with the correct control arms.  The rotors were "just okay", so they will be replace with new Ford units.  The original wheel cylinders, master cylinder and proportioning valve will also be rebuilt. Check out the pictures of the original disc brake proportioning valve.  This one was originally black.  Some cars also receive gray painted valves.

With a little play in the steering box, it was decided that it should also be rebuilt.  The gas tank has been replaced and gas and brake lines will be installed.

Lots of original finishes were discovered with gentle cleaning on parts like the front coil springs.  Check out the pictures and captions below for more details.  We will have more pictures soon!


The floor cleaned up very nicely revealing the original red sealer finish.
www.VirginiaClassicMustang.com

We decided to remove the brake system and suspension.
www.VirginiaClassicMustang.com
To clean many of the metal parts, we use Metal Rescue to remove the minor rust and reveal the original finish and paint markings.
www.VirginiaClassicMustang.com

Jeremy at Maple Hill Restoration built this container to soak various long parts like the strut rods in the Metal Rescue.
www.VirginiaClassicMustang.com

The original parking brake assembly and handle was nice but a bit dirty.
www.VirginiaClassicMustang.com
The original parking brake assembly and handle cleaned up beautifully.
www.VirginiaClassicMustang.com

The firewall area will be cleaned and left with its original finish.
www.VirginiaClassicMustang.com


The original tag on the quick steering box has a date of 6C10B.  That represents March 10, 1966.  The HCC AX is the code for a quick ratio manual steering box.
www.VirginiaClassicMustang.com

The original longer Shelby steering pitman arm still has its original yellow paint markings.
www.VirginiaClassicMustang.com

The original front coil springs on the Shelby have a white marking that we have not seen before on the HiPo springs.  They also have the more typical browish red markings.  They were originally painted black before the markings were applied.
www.VirginiaClassicMustang.com

The original front coil springs on the Shelby have a white marking that we have not seen before on the HiPo springs.  They also have the more typical browish red markings.  They were originally painted black before the markings were applied.
www.VirginiaClassicMustang.com

The original front coil springs on the Shelby have a white marking that we have not seen before on the HiPo springs.  They also have the more typical browish red markings.  They were originally painted black before the markings were applied.
www.VirginiaClassicMustang.com

Here is another disc brake proportioning valve with original black paint.  Some of the valves were painted gray, but we've seen a lot of black ones like this.
www.VirginiaClassicMustang.com

The end plate on the Mustang disc brake proportioning valves are stamped with a date.  This one is stamped "28-6".  This represents the 28th day of 1966.
www.VirginiaClassicMustang.com



Mar 5, 2014

New Mustang Parts! 5 Speed Shifter Knobs.

1965 and 1966 Mustang 5 Speed Shift Knob.
www.VirginiaClassicMustang.com
T-5  5 speed transmission conversions in early Mustangs are very popular.  We now have some 5 spd. shift knobs to compliment our 5 spd. shifter handle.

They are made just like the original Mustang shifter knobs but feature the 5 speed shift pattern.

Check them out at the links below:

IN-5652  65-66  5 Speed Shifter Knob (with correct chrome bezel / retaining nut)

IN-5681  67-68  5 Speed Shifter Knob
1967 and 1968 Mustang 5 Speed Shift Knob.
www.VirginiaClassicMustang.com



Mar 3, 2014

Just the Details...1966 Shelby Mustang GT350

1966 Mustang Shelby GT350.  SFM6S1732
www.VirginiaClassicMustang.com

The "clean up" continues on our 66 Shelby (6S1732) at Maple Hill Restoration.  In case you have not been following our Blog posts, the last owner had this GT350 since 1972.  During that time, it was stored well and had been used sparingly.  He just maintained the car and kept every original part that was removed over the years.

Rather than performing a complete restoration, we wanted to preserve lots of the car's originality by just cleaning it up.  We originally did not plan to pull the engine, but the last owner painted the engine black and the only way to really repaint the blue properly was to remove the engine.  This also made it easier to clean the fender aprons.  They have now been gently cleaned and retain their original paint.

The removal of the grease and dirt from the floor revealed the original red sealer finish which, of course, will stay.

The engine appears to have never been apart and is in excellent condition.  Due to an oversize drain plug that was installed in the oil pan, we have removed the pan to repair the hole to its original size.  We also have had the original HiPo water pump rebuilt, and it will be re-installed.

Other parts and parts of the car that retain their original finish will be carefully cleaned and left as is.  

Be sure to check out the captions on the pictures of the 289 HiPo engine flywheel, HiPo balancer and the Shelby floor pans for more details.  We will post more pictures soon!

The Shelby's original transmission cross member still has its original finish.
www.VirginiaClassicMustang.com

Here is the plate between the engine and bellhousing on the original 289 HiPo.  It is interesting to note the original blue paint pattern.
www.VirginiaClassicMustang.com

Here is the original flywheel 289 HiPo.  It still has its original orange paint marking.
www.VirginiaClassicMustang.com

The 289 HiPo flywheel on the Shelby has a date casting of 5L4.  That's November 4, 1965 and is the earliest dated part on the car.
www.VirginiaClassicMustang.com

The original 289 HiPo harmonic balancer was painted black.
www.VirginiaClassicMustang.com
The Shelby's original HiPo harmonic balancer has an A6 (January 1966) stamping date.
www.VirginaClassicMustang.com

The original 289 High Performance engine has 82K original miles.  It's never been apart and is super clean inside.
www.VirginiaClassicMustang.com

Here is a close up of the timing chain cover's date.  The 66, of course, represents 1966.  The one dot represents one month - January 1966.
www.VirginiaClassicMustang.com


Later in '66, the motor mounts used on the 289 HiPo were the same as other 289's.  These cleaned up very nicely and the original finish will remain.
www.VirginiaClassicMustang.com

Almost 50 years of dirt and grease was removed to reveal a super nice original finish on the floor in the Shelby.
www.VirginiaClassicMustang.com

Almost 50 years of dirt and grease was removed to reveal a super nice original finish on the floor in the Shelby.
www.VirginiaClassicMustang.com

Almost 50 years of dirt and grease was removed to reveal a super nice original finish on the floor in the Shelby.
www.VirginiaClassicMustang.com

Almost 50 years of dirt and grease was removed to reveal a super nice original finish on the floor in the Shelby.
www.VirginiaClassicMustang.com