Just the Details...1966 Shelby Restoration 6S033

1966 Shelby GT350 Mustang in primer
www.VirginiaClassicMustang.com

It's been a while since we have posted about the progress on our '66 GT350 Shelby Mustang project.  Jeremy at Maple Hill Restoration has now completed the body work on the underside, trunk area and front suspension/engine compartment area, and these areas are now in primer.

As shown in a few of the pictures below, all of the sheet metal date stamping were covered with 3M Soft Edge Foam Masking Tape to prevent excessive filling of the stamping by the primer.

All of these areas will now be sanded again (whew!) before the final finishes are applied...lots of work to go, but we are glad to be this far along.

All the dents have been repaired and the 1966 Shelby GT350 Mustang in primer
www.VirginiaClassicMustang.com

1966 Shelby GT350 Mustang in primer
www.VirginiaClassicMustang.com

1966 Shelby GT350 Mustang in primer
www.VirginiaClassicMustang.com

1966 Shelby GT350 Mustang in primer.  Close up shot of the date code on the front strut rod brace.
www.VirginiaClassicMustang.com

1966 Shelby GT350 Mustang in primer.  Rear Frame Rail.
www.VirginiaClassicMustang.com

1966 Shelby GT350 Mustang in primer.  Close up shot of another date code.
www.VirginiaClassicMustang.com

1966 Shelby GT350 Mustang in primer.  Original spot welds in the rear floor pan.
www.VirginiaClassicMustang.com

1966 Shelby GT350 Mustang in primer.  All but the very, very late '65 Mustangs had this hump in the floor pans for the rear parking brake cables.  This was changed very shortly after the production of this particular car.
www.VirginiaClassicMustang.com

1966 Shelby GT350 Mustang in primer.  All original floor pans were retained.  This shot shows the "irregular" stamping on one of the rear floor pan drain holes.
www.VirginiaClassicMustang.com

1966 GT350 Shelby Mustang.  We were happy to retain both original trunk floors also.
www.VirginiaClassicMustang.com

Just the Details...1965 Mustang Six Cylinder Engine Detail (Part 2)

1965 Mustang 200 Six Cylinder Engine
www.VirginiaClassicMustang.com

Here are some more great pictures of the engine going in Jeremy Turner's (Maple Hill Restoration) '65 Mustang Convertible.  I just love looking at these.  It's cool to see a 200 cubic inch six detailed like this when you usually just see the V-8's.

1965 Mustang 200 Six Cylinder Engine with air conditioning.
www.VirginiaClassicMustang.com

1965 Mustang 200 Six Cylinder Engine
www.VirginiaClassicMustang.com

1965 Mustang 200 Six Cylinder Engine.  Check out the correct engineering part number on the motor mount...nice!
www.VirginiaClassicMustang.com

1965 Mustang 200 Six Cylinder Engine.  How about this cool NOS alternator belt?
www.VirginiaClassicMustang.com

1965 Mustang 200 Six Cylinder Engine.  This is a close up of the FoMoCo stamping in the oil pan.
www.VirginiaClassicMustang.com

The 1965 Mustang 200 Six Cylinder Engine's air conditioning compressor.
www.VirginiaClassicMustang.com

1965 Mustang 200 Six Cylinder Engine engine assembly date stamping.  It's difficult to see, but it's "4M29A" for December 29, 1964.
www.VirginiaClassicMustang.com

1965 Mustang 200 Six Cylinder Engine
www.VirginiaClassicMustang.com

1965 Mustang 200 Six Cylinder Engine's ignition coil detail.
www.VirginiaClassicMustang.com

1965 Mustang 200 Six Cylinder Engine.  Here's a close up of the December 22nd date stamping on the oil pan...pretty cool!
www.VirginiaClassicMustang.com

Just the Details...65 Mustang Six Cylinder Engine Detail

1965 Mustang 200 Six Cylinder Engine
www.VirginiaClassicMustang.com

WOW!  We just visited Jeremy Turner at Maple Hill Restorations to check out the engine that he is finishing up for his 1965 Mustang Convertible.  It's absolutely beautiful!  Check out a few quick pictures here.  It's all we have time for today, but check back Friday for more.

Later next week, we will have pictures of it installed in the Mustang and running!

1965 Mustang 200 Six Cylinder Engine
www.VirginiaClassicMustang.com

1965 Mustang 200 Six Cylinder Engine
www.VirginiaClassicMustang.com

1965 Mustang 200 Six Cylinder Engine
www.VirginiaClassicMustang.com

1967 Mustang 390 Air Cleaner Assembly

1967 Mustang 390 Air Cleaner Assembly with Chrome Lid.
www.VirginiaClassicMustang.com

We now have a beautiful reproduction of the 67 Mustang 390 GT Air Cleaner Assembly.  This is the style without the emissions control tube.

This Air Cleaner is an exact copy made from the original Ford Tooling.  It includes the correct base in the correct Ford Blue color and a beautifully chromed lid with the proper rubber seal.

While this air cleaner assembly is correct for the 67 390 and some early production 68 390 Mustangs, it is a fantastic stock appearing upgrade for the very restrictive 68-70 390 and 428 air cleaner assembly.

Our part number is EG-4971.  Click on the part number link or one of the pictures for the price and/or to order.

We also have the lid only - part number EG-4972.

1967 Mustang 390 Air Cleaner Assembly with Chrome Lid.
www.VirginiaClassicMustang.com

1967 Mustang 390 Air Cleaner Assembly with Chrome Lid.
www.VirginiaClassicMustang.com

69 and 70 Mustang Windshield Stops

1969 and 1970 Mustang Windshield Rubber Stops.
www.VirginiaClassicMustang.com

We now have exact reproductions of the original 1969 and 1970 Mustang Windshield Stops.  These stops are constructed of stamped steel brackets with rubber "stop" ends.  Each one is attached with two screws which are included.

These stops are used at the bottom of the windshield to properly align and hold the windshield in place during installation.

They are sold as a set of two.  There are two used per car, so one set is all you need for one Mustang.  Our part number is PE-8912.  Please click on the part number link or one of the pictures for the price and/or to order.

1969 and 1970 Mustang Windshield Rubber Stops.
www.VirginiaClassicMustang.com

New! 1967-70 Mustang Chrome Air Cleaner Lid

67-70 Mustang Chrome HiPo Air Cleaner Lid.  Fits 67 390, Early 68 390, 69-70 428 Cobra Jet and 69-70 Boss 302 without the Shaker option.
www.VirginiaClassicMustang.com

We now have these nice chrome air cleaner lids in stock for your Mustang.  These are very nice reproductions of the chrome air cleaner lid found on the following:

67 390
Early 68 390
69-70 428 CJ without Shaker
69-70 Boss 302 without Shaker

Perfect fit for all of the stock air cleaners with 16.75 inch outside diameter.  They will not fit 17 inch air cleaners.

They feature nice chrome plating along with the correct rubber seal already installed.

Click the part number or either picture to order and/or see the price.  Our part number is EG-4972.

Underside view showing rubber seal - 67-70 Mustang Chrome HiPo Air Cleaner Lid.  Fits 67 390, Early 68 390, 69-70 428 Cobra Jet and 69-70 Boss 302 without the Shaker option.
www.VirginiaClassicMustang.com

Now in Stock! 1969 Mustang Rim Blow Woodgrain Steering Wheel

1969 Mustang Deluxe Woodgrain Rim Blow Steering Wheel.
www.VirginiaClassicMustang.com

We now have a very nice reproduction of the original '69 Mustang Deluxe Woodgrain Rim Blow Steering Wheel.  Most all of these original wheels on Mustangs are worn and cracked.  Now your steering wheel can be replaced with a brand new one.  Click on one of the images or this part number IN-8833 link to see price and to order.

The rim blow horn switch that fits into the steering wheel is not included, but we do have it - our part number is IN-460.  Other related parts that you may need include our IN-8831 1969 Mustang 3 Spoke Steering Wheel Cover Assembly and our IN-8841 Black Pad to go with this.

1969 Mustang Deluxe Woodgrain Rim Blow Steering Wheel.
www.VirginiaClassicMustang.com