Mustang Headliner Insulation

 

Mustang Fastback Headliner Insulation
©Virginia Classic Mustang Inc

Mustang Coupe Headliner Insulation
©Virginia Classic Mustang Inc

If you are installing a headliner in your Mustang, be sure to get the insulation kit that installs to the inside of the roof before the headliner goes in.

This was originally used on the Mustangs and certainly makes a nice difference.

Click on the below links or the pictures to order:

Mustang Coupe Headliner Insulation Kit

Mustang Fastback Headliner Insulation Kit

Magnum 500 Wheel Set

 

©Virginia Classic Mustang Inc
Magnum 500 Set

SUPER DEAL - This set retails for over $1100.00! Very Limited Quantity.

If you want the really nice staggered look with that a bit wider wheel on the rear, this is the perfect set.
Keep in mind that the rears probably will not fit a '65-66 Mustang without sheet metal work, but this will fit most '67-68 models and pretty much any '69-70 and '71-73 where you have much more room.

The 7 inch wide wheels have the perfect backspace of 4.25 inches, and the wider 8 inch wheels work great with the 4.75 inch backspace. The picture here just does not do them justice. This is a great looking set up, and a tremendous deal.

This incredible set of wheels includes the following:

2  15 x 7 Aluminum Magnum 500 Wheels (Legendary Brand)
2  15 x 8 Aluminum Magnum 500 Wheels (Legendary Brand)
4  Magnum 500 Pony Wheel Centers (with proper plates to fit these wheels)
20 Chrome Lug Nuts

CLICK HERE TO ORDER

Happy Birthday to the Ford Mustang! 60 Years

 

Happy Birthday to the Ford Mustang!

60 years, and we have been involved with these cars and parts every single day of over 45 of those years! WOW!

Fix that Loose and Sloppy 4 Speed Shift Lever on your 1965-68 Mustang

 

65-68 Mustang and Shelby 4 Speed Shift Lever Rebuilt Kit
©Virginia Classic Mustang Inc

The stock 4 speed shifters in a 1965-68 Mustang and Shelby often get a bad rap, because they become loose feeling and sloppy. 

Normally though, the solution is quite simple.

The trunnions, springs, and bushings just need to be replaced at the shift lever.

We have all the parts needed in this shifter rebuild kit, along with a few additional items that may make it even better!

Here is a list of items (with clickable links) that may be needed:

65-68 Mustang 4 Speed Shift Lever Rebuild Kit

65-68 Mustang 4 Speed Shift Linkage Lever Rebuild Kit

65-73 Mustang 4 Speed Shift Lever Bolt and Washer Set

65-68 Mustang and Shelby 4 Speed Shift Lever Rebuilt Kit
©Virginia Classic Mustang Inc

65-68 Mustang and Shelby 4 Speed Shift Lever Rebuilt Kit
©Virginia Classic Mustang Inc

65-68 Mustang and Shelby 4 Speed Shifter Linkage Kit
©Virginia Classic Mustang Inc

65-73 Mustang 4 Speed Shift Lever Bolt and Washer Set
©Virginia Classic Mustang Inc

1969-70 Mustang Fastback Interior Trim Panel - Available Again!

 

1969-70 Mustang Fastback Plastic Interior Trim Panel with clips
©Virginia Classic Mustang Inc

We have been out of these for over two years, but they are back in stock!

This is the rear trim panel that fits above the trap door under the rear window on 1969 and 1970 Mustang Fastbacks.

It is only used on cars with a fold down rear seat.

It is made of ABS Plastic with the correct grain.

This panel even includes the six proper mounting clips.

Order by clicking here.

1969-70 Mustang Fastback Plastic Interior Trim Panel with clips
©Virginia Classic Mustang Inc