Virginia Classic Mustang Blog: October 2013

Oct 30, 2013

1965 GT350 Mustang Shelby Battery Tray

1965 GT350 Mustang Shelby Plastic Battery Tray to mount battery in trunk.
www.VirginiaClassicMustang.com

We now have a reproduction of the plastic battery tray used when the battery was mounted in the trunk of the first 300 + '65 GT350 Mustang Shelbys. These were installed on the trunk floor with 1/8 inch pop rivets in each corner.

Our part number is EG-2603.

We also have the negative (ground) battery cable for the same trunk mounted battery application and the special rubber plugs for the battery apron for the vacant holes up front.

Oct 28, 2013

Customer Car - 1969 Mustang Convertible

1969 Mustang Convertible
www.VirginiaClassicMustang.com

We love to get pictures of customer cars. Here's a 1969 Mustang Convertible that the current owner purchased in 1974. It features deluxe white interior and the deluxe wire wheel covers. It currently has only 46K original miles.

Thanks for sharing!

Oct 25, 2013

1968 and 1969 Mustang Ignition Switch Plug with Wiring Pigtail - New Part!

1968 and 1969 Mustang Ignition Switch Plug with Wiring Pigtail.
www.VirginiaClassicMustang.com

Years ago, the ignition switch wiring plug for the 68-69 Mustangs was discontinued. Well, we have great news, it is available again! This is the plug that plugs into the back of the ignition switch. As pictured, it includes the wiring and splices into the main under dash harness.

Order our part number IN-872.

We also have a complete line of ignition and door lock sets, other year model ignition switches, Mustang wiring harnesses, and more!

Oct 23, 2013

2013 NE SAAC Regional Event Recap (Part 2)

2013 NE SAAC Regional. Lunch at Bill Collin's Collector Fords.
www.VirginiaClassicMustang.com

Here's part number 2 of our NE Regional Shelby Club coverage. Check out our last post for the whole recap of this great event: http://blog.virginiaclassicmustang.com/2013/10/2013-ne-saac-regional-event-recap-part-1.html

2013 NE SAAC Regional. Lunch at Bill Collin's Collector Fords.
www.VirginiaClassicMustang.com

2013 NE SAAC Regional. Car show at the AACA Museum in Hershey, PA.
www.VirginiaClassicMustang.com

Oct 21, 2013

2013 NE SAAC Regional Event Recap (Part 1)

Lining up the Shelbys and Mustangs for the NE Regional SAAC Road Tour.
www.VirginiaClassicMustang.com

The Lehigh Valley Region of the Shelby American Automobile Club puts on the Northeast Regional event every October. The event held this past weekend was the 4th Annual event, and we haven't missed any. It's a great meet. If you have never attended, you may want to think about doing so next year. It never disappoints.

Lining up the Shelbys and Mustangs for the NE Regional SAAC Road Tour.
www.VirginiaClassicMustang.com

The event always begins on Friday evening with an evening social at the Sheraton Hotel in Harrisburg, PA. It's always fun to just hang around and talk cars. We always bring a few new parts and literature to display.

Saturday morning brings a great breakfast buffet in the same banquet room at the Sheraton. After our road tour instructions, it's off to the back parking lot to line up for the tour. Again, this year the weather was beautiful, and we experienced the best tour route yet with a few stops, curvy roads and covered bridges.

The tour ends at Bill Collin's Collector Fords for a great lunch.

Saturday evening is also fun with the program and banquet back at the host hotel. On Sunday, the popular vote car show is held at the AACA Museum in Hershey, PA.

Next year, the plan is to "freshen" things up a bit with a different location near Gettysburg. Don't miss it!

We will have more pictures this week. Enjoy!

Lining up the Shelbys and Mustangs for the NE Regional SAAC Road Tour.
www.VirginiaClassicMustang.com

The view from a 66 GT350 Shelby during the NE Regional SAAC Road Tour.
www.VirginiaClassicMustang.com

First stop for the NE Regional SAAC Road Tour.
www.VirginiaClassicMustang.com

First stop for the NE Regional SAAC Road Tour. Group picture time.
www.VirginiaClassicMustang.com

First stop for the NE Regional SAAC Road Tour.
www.VirginiaClassicMustang.com

NE Regional SAAC Road Tour.
www.VirginiaClassicMustang.com

Oct 18, 2013

Customer Car - 1965 GT350 Mustang Shelby

1965 GT350 Mustang Shelby. SFM5S289. Vintage photo from 1971 or 1972 in Germany.
www.VirginiaClassicMustang.com

We love it when a customer sends in photos of their car. It's even better when a vintage image is included!!

This is 1965 GT350 Mustang - Serial Number SFM5S289 (cool number, huh?). This Shelby was originally purchased by Raymond W. Gregg, Jr. from Houma, LA.

It was later purchased by Ford Autohaus (Erlansee, Germany) in 1968 or 1969. The dealer had acquired it from an army lieutenant. It was successfully autocrossed and drag raced as "Irritation" by the dealer at an army airfield as shown above. Purchased in Germany in 1972 by the current owner who now lives in Alabama and still owns it today.

1965 GT350 Mustang Shelby. SFM5S289
www.VirginiaClassicMustang.com

Oct 16, 2013

Mustang Front Suspension Spring Seat and Bushing Assembly

1965-73 Mustang Front Suspension Spring Seat and Bushing Assembly.
www.VirginiaClassicMustang.com

The spring seat and bushing assembly is a very common item that needs replacement on any 1965-73 Mustang. With the availability of the nice reproduction at a really reasonable price, it's not worth replacing the bushing only. It's much easier to just replace the entire assembly. This is done by removing the front coil spring and old assembly and installing the new unit on the upper control arm.

Our part number is SU-129.

In addition to the 65-73 Mustang, this part also fits the following Fords:

1967-1973 Cougar
1960-1970 Falcon
1960-1974 Comet
1966-1971 Fairlane
1968-1971 Montego
1968-1971 Torino
1970-1977 Maverick

For our customers looking for a great improvement over the stock part, you may want to consider our spring seat and bushing assembly with roller bearings (SU-1291).

Oct 14, 2013

1969 Mustang Boss 302 - Original Images

1969 Ford Mustang Boss 302 prototype
Image courtesy of Ford Motor Company

As the 50th Anniversary of the Mustang approaches, Ford Motor Company continues to release cool information and vintage photos of various Mustang models. Today, we take a look at the 1969 Mustang Boss 302.

In early 1968, Ford named Semon E. "Bunkie" Knudsen its president. Knudsen was a firm believer that high performance could sell more cars. A designer named Larry Shinoda was hired and along with chief engineer Howard Freers, they were given the task of designing a special high performance model Mustang. This Mustang would be inspired by the cars that won the first two Trans Am championships in 1966 and 1967.

The 1969 and 1970 Mustang Boss 302 models, of course, became very successful on the track winning the Trans Am championship in 1970.

Enjoy the pictures!

1969 Ford Mustang Boss 302 prototype
Image courtesy of Ford Motor Company

Designer Larry Shinoda in the design studio courtyard with the 1969 Ford Mustang Boss 302.
Image courtesy of Ford Motor Company

The high-performance 302-cubic-inch V8 used in the 1969 Ford Mustang Boss 302.
Image courtesy of Ford Motor Company

Parnelli Jones driving the Ford Mustang Boss 302 in the 1970 Trans Am championship.
Image courtesy of Ford Motor Company

The high-performance 302-cubic-inch V8 used in the 1969 Ford Mustang Boss 302.
Image courtesy of Ford Motor Company

1969 Ford Mustang Boss 302
Image courtesy of Ford Motor Company

1969 Ford Mustang Boss 302 prototype
Image courtesy of Ford Motor Company

1969 Ford Mustang Boss 302 prototype being tested at the Dearborn Proving Ground.
Image courtesy of Ford Motor Company

Pages

Oct 30, 2013

Oct 28, 2013

Oct 25, 2013

Oct 23, 2013

Oct 21, 2013

Oct 18, 2013

Oct 16, 2013

Oct 14, 2013